Galvanized Nails
7” Galvanized nails are used for the perimeter of your lawn installation, this helps tack the grass to the ground and ensure it stays where it is. These nails are placed with a 6” gap between them around the entire perimeter.
4” Galvanized nails are used for the seams/the joining of the grass, this helps hold the grass down after the glue and seam tape have been placed down. These nails are placed 1/4” away from each the seam with a 3-4” gap between them.
7” Galvanized nails are used for the perimeter of your lawn installation, this helps tack the grass to the ground and ensure it stays where it is. These nails are placed with a 6” gap between them around the entire perimeter.
4” Galvanized nails are used for the seams/the joining of the grass, this helps hold the grass down after the glue and seam tape have been placed down. These nails are placed 1/4” away from each the seam with a 3-4” gap between them.
7” Galvanized nails are used for the perimeter of your lawn installation, this helps tack the grass to the ground and ensure it stays where it is. These nails are placed with a 6” gap between them around the entire perimeter.
4” Galvanized nails are used for the seams/the joining of the grass, this helps hold the grass down after the glue and seam tape have been placed down. These nails are placed 1/4” away from each the seam with a 3-4” gap between them.
For 7” nails you will need about 2 per lineal foot. For 4” nails you will need about 10 per lineal foot (only used if you are joining pieces of grass together